Our product range includes a wide range of ETP Chemicals such as Bio Culture, Inorganic Micro Nutrients and Organic Micro Nutrients.

Color Removal Chemical

Color Removal Chemical

We “Geo Enviro Solution” is a manufacturer / Traders of “Color Removal Polymer”


Cationic Organic color removal coagulant


GES DECOL 105 is a highly cationic liquid grade coagulant. It is supplied in a solution form which is readily pumpableand easily applied to process water streams.

GES DECOL 105 is of low molecular weight.

Principal Uses

GES DECOL 105 can be used in a wide range of industries as a coagulant.

The main use of GES DECOL 105 is in the treatment of colored effluents from the textile industry.

GES DECOL 105 is particularly effective in the treatment of dyestuff where reactive dyes are present.

GES DECOL 105 will act as a single stage treatment, but in many cases its performance will be enhanced when used inconjunction with the appropriate flocculant GES FL419C, which will assist separation of the coagulated material from the supernatant liquors.


Typical Properties
Physical Form Colorless / off-white slightly viscous liquid
Solids Content 50% Minimum
Viscosity Approximately 30-130cPs
Solubility in water Infinite
pH 3-5

GES DECOL 105 can be added neat to the stream with the use of rigorous agitation. Alternatively it may be added as asolution. This can be in the range 10:1 to 100:1 depending on application conditions. Solutions can be prepared either with the use of tanks and stirrers or alternatively by inline dilution of the neat product using static mixers.

GES DECOL 105 in its undiluted form exhibits good storage characteristics. At temperatures of 10°C – 25°C a shelf life inexcess of 12 months is expected. Prolonged storage at temperatures outside of this range should be avoided where possible.

Solutions of GES DECOL 105 of 0.5 – 1%which have been prepared should not be kept in excess of 5 days, as after this, some loss of product efficiency may occur.

Corrosive Properties

GES DECOL 105is moderately corrosive towards mild steel, cast iron, aluminium and zinc surfaces and use of theseshould be avoided. Recommended materials of construction are stainless steel, fiber glass, polyethylene and polypropylene.


Standard packaging for GES DECOL 105 is 50 kg plastic drums.

Health and Safety

GES DECOL 105 exhibits a very low order of oral toxicity and does not present any abnormal problems in its handling orgeneral use.


Quick Lime

Quick Lime

We “Geo Enviro Solution” provides Quality Quick lime for various manufacturing sectors. Our Ranges of Products are best in quality & Timely Delivery.

Calcium oxide (CaO), commonly known as quicklime or burnt lime, is a widely used chemical compound. It is a white, caustic,alkaline, crystalline solid at room temperature. The broadly used term “lime” connotes calcium-containing inorganic materials, which include carbonates, oxides and hydroxides of calcium, silicon, magnesium, aluminium, and iron predominate, such as limestone. By contrast, “quicklime” specifically applies to the single chemical compound calcium oxide. Calcium oxide which survives processing without reacting in building products such as cement is called free lime.

Calcium oxide is usually made by the thermal decomposition of materials such as limestone, or seashells, that contain calcium carbonate (CaCO3; mineral calcite) in a lime kiln. This is accomplished by heating the material to above 825 °C (1,517 °F), a process called calcination or lime-burning, to liberate a molecule of carbon dioxide (CO2); leaving quicklime. The quicklime is not stable and, when cooled, will spontaneously react with CO2 from the air until, after enough time, it will be completely converted back to calcium carbonate unless slaked with water to set as lime plaster or lime mortar.

Mainly Quick Lime i.e Calcium Oxide is used for Fly Ash Bricks Manufacturing.




We offer Best in Quality EDTA. EDTA (ethylenediaminetetraacetic acid) is an amino acid compound, a powerful chelating agent – meaning it attaches to plaque build up and heavy metals and removes them naturally from the body. EDTA is recognized by the body and easily assimilated

EDTA is one of the most powerful metal chelators known. However, EDTA has become a commonly known name. There are actually many forms and chemical formulas for the same basic product called EDTA. All are formulated to remove metals, but for different purposes. Industrial Grade EDTA is used in batteries and for other practical purposes. Food Grade EDTA is used to protect us to some degree from harmful metals that find their way into the foods we eat. The sodium and calcium salts of EDTA (ethylenediaminetetraacetic acid) are common sequestrants in many kinds of foods and beverages.

And Pharmaceutical Grade EDTA is used in the best chelation products for its primary function, that of removing unwanted metals (in particular Calcium, Mercury, Lead, Cadmium & Arsenic) from the body’s organs and cardiovascular system.


In industry, EDTA is mainly used to sequester metal ions in aqueous solution. In the textile industry, it prevents metal ion impurities from modifying colours of dyed products. In the pulp and paper industry, EDTA inhibits the ability of metal ions, especially Mn2+, from catalyzing the disproportionation of hydrogen peroxide, which is used in “chlorine-free bleaching.” In a similar manner, EDTA is added to some food as a preservative or stabilizer to prevent catalytic oxidative decoloration, which is catalyzed by metal ions. In soft drinks containing ascorbic acid and sodium benzoate, EDTA mitigates formation of benzene (a carcinogen)

The reduction of water hardness in laundry applications and the dissolution of scale in boilers both rely on EDTA and related complexants to bind Ca2+, Mg2+, as well as other metal ions. Once bound to EDTA, these metal centers tend not to form precipitates or to interfere with the action of the soaps and detergents. For similar reasons, cleaning solutions often contain EDTA.

The solubilization of ferric ions near neutral pH is accomplished using EDTA. This property is useful in agriculture including hydroponics, especially in calcareous soils. Otherwise, at near-neutral pH, iron(III) forms insoluble salts, which are less bioavailable. Aqueous [Fe(edta)]- is used for removing (“scrubbing”) hydrogen sulfide from gas streams. This conversion is achieved by oxidizing the hydrogen sulfur to elemental sulfur, which is non-volatile:
2 [Fe(edta)]- + H2S → 2 [Fe(edta)]2− + S + 2 H+

In this application, the ferric center is reduced to its ferrous derivative, which can then be reoxidized by air. In similar manner, nitrogen oxides are removed from gas streams using [Fe(edta)]2-. The oxidizing properties of [Fe(edta)]- are also exploited in photography, where it is used to solubilize silver particles.

EDTA was used in the separation of the lanthanide metals by ion-exchange chromatography. Perfected by F.H. Spedding et al. in 1954, the method relies on the steady increase in stability constant of the lanthanide EDTA complexes with atomic number. Using sulfonated polystyrene beads and copper(II) as a retaining ion, EDTA causes the lanthanides to migrate down the column of resin while separating into bands of pure lanthanide. The lanthanides elute in order of decreasing atomic number. Due to the expense of this method, relative to counter-current solvent extraction, ion-exchange is now used only to obtain the highest purities of lanthanide (typically greater than 4N, 99.99%)



Citric Acid

Citric Acid

We Geo Enviro Solution supply “Citric Acid” in Bulk Quantity. And we are much concentrated on Quality of the product & satisfy our customer needs. Customet Satisfaction is our main goal.

The dominant use of citric acid is as a flavoring and preservative in food and beverages, especially soft drinks. Within the European Union it is denoted by E number E330. Citrate salts of various metals are used to deliver those minerals in a biologically available form in many dietary supplements. The buffering properties of citrates are used to control pH in household cleaners and pharmaceuticals. In the United States the purity requirements for citric acid as a food additive are defined by the Food Chemicals Codex, which is published by the United States Pharmacopoeia (USP).

Foods, other
Citric acid can be added to ice cream as an emulsifying agent to keep fats from separating, to caramel to prevent sucrose crystallization, or to recipes in place of fresh lemon juice. Citric acid is used with sodium bicarbonate in a wide range of effervescent formulae, both for ingestion (e.g., powders and tablets) and for personal care (e.g., bath salts, bath bombs, and cleaning of grease). Citric acid is also often used in cleaning products and sodas or fizzy drinks.Citric acid sold in a dry powdered form is commonly sold in markets and groceries as “sour salt”, due to its physical resemblance to table salt. It has use in culinary applications where an acid is needed for either its chemical properties or for its sour flavor, but a dry ingredient is needed and additional flavors are unwanted (e.g., instead of vinegar or lemon juice).

Cleaning and chelating agent
Citric acid is an excellent chelating agent, binding metals. It is used to remove limescale from boilers and evaporators. It can be used to soften water, which makes it useful in soaps and laundry detergents. By chelating the metals in hard water, it lets these cleaners produce foam and work better without need for water softening. Citric acid is the active ingredient in some bathroom and kitchen cleaning solutions. A solution with a 6% concentration of citric acid will remove hard water stains from glass without scrubbing. In industry, it is used to dissolve rust from steel. Citric acid can be used in shampoo to wash out wax and coloring from the hair.
Illustrative of its chelating abilities, citric acid was the first successful eluant used for total ion-exchange separation of the lanthanides, during the Manhattan Project in the 1940s. In the 1950s, it was replaced by the far more efficient EDTA. It can be used to slow setting of Portland cement. It can delay setting time substantially.

Cosmetics and pharmaceuticals
Citric acid is widely used as a pH adjusting agent in creams and gels of all kinds. In this role, it is classified in most jurisdictions as a processing aid and so does not need to be listed on ingredient lists.Citric acid is an alpha hydroxy acid and used as an active ingredient in chemical peels.Citric acid is commonly used as a buffer to increase the solubility of brown heroin. Single-use citric acid sachets have been used as an inducement to get heroin users to exchange their dirty needles for clean needles in an attempt to decrease the spread of AIDS and hepatitis. Other acidifiers used for brown heroin are ascorbic acid, acetic acid, and lactic acid; in their absence, a drug user will often substitute lemon juice or vinegar.Citric acid is used as one of the active ingredients in the production of antiviral tissues.

Citric acid can be used in food coloring to balance the pH level of a normally basic dye. It is used as an odorless alternative to white vinegar for home dyeing with acid dyes.
Industrial and construction
Citric acid can be used as a successful alternative to nitric acid in passivation of stainless steel.



Bio Culture Chemical

Bio Culture Chemical

We “Geo Enviro Solution” is a leading supplier of Bio Culture chemical for ETP & STP. It is a source of phosphorus and potassium. It is also a buffering agent. When used in fertilizer mixtures with urea and ammonium phosphates, it minimizes escape of ammonia by keeping the ph at a relatively low level.


  • Enhanced BOD and COD removal
  • Builds up MLSS level
  • Rapid start-up following initializing and reseeding
  • Rapid recovery-following shock loading
  • Reduction in filamentation and bulking
  • Reduction in sludge volume
  • Contains micro-nutrients for the growth of bacteria
  • Non-foaming and easy to handle
  • Organic Waste + GES SS-28 + O2 = New Cells + CO2+H2O+Energy


Optimum dosage varies with system operating conditions, influent characteristics and load. It is best to prehydrate our product prior to use in non-chlorinated water.


Inorganic Micro Nutrient

Inorganic Micro Nutrient

We “Geo Enviro Solution” is the leading supplier of inorganic Micro Nutrients for Effluent Treatment Plant & Sewage Treatment Plant. A nutrient is said to be essential if it must be obtained from an external source, either because the organism cannot synthesize it or produces insufficient quantities.


  • No need for Urea & DAP addition
  • Enhanced BOD and COD removal
  • Builds up biomass level
  • Reduction in imbalance in the F/M ratio
  • Helps to reduce foaming
  • Easy to handle
  • Reduces Cow-Dung addition
  • Can be used for cultivation



Optimum dosage varies with system, operating conditions influent characteristics and load. However the general dosage is 5 ppm on the quantity of effluent treated per day.


Organic Micro Nutrient

Organic Micro Nutrient

We “Geo Enviro Solution” is a leading supplier of Organic Micro Nutrients for Effluent Treatment Plant & Sewage Treatment Plant. Organic MicroNutrients are designed to be used as a foliar spray to prevent or correct micronutrient deficiencies in plants as indicated by visual inspection of leaf or fruit, leaf analysis or soil testing. The most common indicator of micronutrient deficiency is yellowing leaves.



  • Enhanced BOD and COD removal
  • Builds up Biomass level
  • Reduction in imbalance in the FM ratio
  • No need for Urea and DAP addition
  • Helps to reduce foaming
  • Easy to handle
  • Eco friendly natural product
  • Reduces Cow-dung addition
  • Can be used for cultivation


Optimum dosage varies with system operating conditions, influent characteristics and load. However the general dosage is 5.0-20 ppm on the quantity of effluent treated per day.

Other Information

  • Delivery Time: Within 1 Week
  • Packaging Details: GES EMN-2900 is supplied in 25 kgs non-returnable carboys. Generally company will take a week’s time for the dispatch of the material on receipt of firm order from the customer.For further details contact GEO ENVIRO SOLUTIONS Marketing Department.




We  supply high quality Hydrated Lime Powder that is fine free flowing powder. We make available the Hydrated Lime Powder in various specifications. The Hydrated Lime Powder distributed by us is pure and free from any unwanted ingredients. It is extensively used in various industrial and chemical applications.

Manufacturing Process :
It is a colorless crystal or white powder, and is obtained when calcium oxide is mixed, or “slaked” with water.
It can also be precipitated by mixing an aqueous solution of calcium chloride and an aqueous solution of sodium hydroxide.
CaO + H2O → Ca(OH)2

Used As :
A flocculent, in water and sewage treatment and improvement of acid soils
An ingredient in whitewash, mortar, and plaster
An alkali used as a lye substitute in no-lye hair relaxers
A chemical depilatory agent found in Nair
A calcium supplement in mineral fortified baby formulas
In Bordeaux mixture to neutralize the solution and form a long lasting fungicide
In the reef aquarium hobby for adding bio-available calcium in solution for calcium-using animals such as algae, snails, hard tube worms, and corals (often referred to as Kalkwasser mix), and also to increase the alkalinity of the water
In the tanning industry for neutralization of acid, the liming of hides and skins and the flocculation of wastewater
In the petroleum refining industry for the manufacture of additives to oils (salicatic, sulphatic, fenatic)
In the chemical industry for manufacture of calcium stearate
In the food industry for processing water (for alcoholic and soft drinks)
Used in the separation of sugar from sugar cane in the sugar industry
Used in the processing of Norwegian lutefisk. Dried cod fish is soaked in a mixture of slaked lime and soda to produce a soft-fleshed fish fillet that is steamed or baked and served with potato leaves
For clearing a brine of carbonates of calcium and magnesium in the manufacture of salt for food and pharmacopoeia
In Native American and Mesoamerican cooking, calcium hydroxide is called “cal”. Corn cooked with cal becomes nixtamal which significantly increases its nutrition value, and is also considered tastier and easier to digest.
In chewing betel nut or coca leaves, calcium hydroxide is usually chewed alongside to keep the alkaloid stimulants chemically available for absorption by the body
Similarly, Native Americans traditionally chewed tobacco leaves with calcium hydroxide derived from burnt shells to enhance the effects
In Chinese cuisine, for making century eggs
In dentistry, it is used as dressing in paste form used for anti-microbial effect during a dental root canal procedure.

Applications :
Chemical industries

Attributes :
Free from impurities
Best chemical reagent
Reacts violently to acids
Turns milky when carbon dioxide is passed
Colorless crystal

Physical Properties
Partial Pressure    101kPa
Iupac Name    Calcium Hydroxide
Other Names    Cal, calcium(II) hydroxide, hydrated lime, milk of lime, pickling lime, slaked lime
Molecular Formula    Ca(OH)2
Molar Mass    74.093 g/mol
Density    2.211 g/cm3, solid

Chemical Properties
Lime as Ca(OH)2    95%
Active CaO    72.5 %
Acid insoluble    0.1%
Iron    150 ppm
Alumina    NIL
Magnesium as MgO    0.5%